DIRTY DELAY PEDAL
Overdrive + Delay
The Grit and the Echo: A Dual-Circuit Hybrid The tre_audio Dirty Delay is not your average time-based effect. It is a deliberate mash-up of a high-character overdrive and a dark, analog-voiced delay. Designed for players who want to move beyond pristine repeats, the Dirty Delay allows you to inject texture, saturation, and lo-fi "grime" directly into your signal path.
Two Circuits. Zero Compromise. The Dirty Delay features two independent analog-voiced circuits that can be used together or entirely separately, effectively putting two pedals in one enclosure:
The Overdrive Section: A warm, mid-forward drive that adds harmonic complexity and "heat" to your signal.
The Delay Section: A dark, evolving echo with repeats that mimic the natural analog decay.
Replicate, Saturate, or Destroy Because the circuits are independent, the Dirty Delay offers three distinct modes of operation:
Independent Delay: Engage just the delay for classic, moody repeats and ambient washes.
Independent Overdrive: Use the pedal as a standalone dirt box to push your amp or other pedals.
The Hybrid "Dirty" Mode: Engage both to saturate your repeats. As the echoes trail off, they interact with the overdrive circuit to create a haunting, disintegrating texture that "sits" perfectly behind your dry signal.
The DIRTY DELAY Pedal is a mashup of two awesome effects, a classic overdrive and a delay, in one pedal! The Overdrive circuit in the pedal is an asymmetrically soft-clipping Overdrive, while the Delay is a versatile echo machine. A selector switch allows you to choose either Overdrive or Delay or both simultaneously. The DIRTY DELAY is great for that larger-than-life arena rock sound or for adding delay to a massive solo to make it sound ever more…. massive.
-
Volume: This controls the volume of the pedal’s output.
Gain:: This knob controls the gain of the clipping amplifier.
Repeats: This controls the number of repeats from a few to infinite.
Delay: The length of delay between echoes is controlled by this knob.
OD/Delay Switch: Set this switch to OD to select the Overdrive-only circuit. Set to Delay to select the Delay-only circuit. Place the switch in the middle position to use both effects at the same time.
Footswitch: True-bypass. Press the switch to route your input signal through the circuit or bypass the circuit.
Power: This pedal takes a standard 9V DC Center-Negative power supply with a 2.1mm negative center barrel. Current: 85mA
-
This device has a one year warranty. If it fails or gives your problems, please email tre@tre_audio.com.
-
“This pedal is super useful and sounds great. I love a “simple” delay. It does the thing and it does it well. It’s been on the board since I got it!” - Kurt L.
“Nice product. Does the task well.” - Dan G.